2V 6V 12V Single Cell Battery Regenerator Battery Activator

XDC-3932 battery activator fully utilizes the characters of high frequency, low voltage and high current to decompose the lead sulfate crystals adhered to the surface of battery plate in the role of directional current, which revert back to lead ions and realize the battery charge and repair.

Description
Inquiry

XDC-3932 2V 6V 12V Single Cell Battery Regenerator Battery Activator

Introduction:

XDC-3932 battery activator all-in-one terminal is used to perform constant current discharge,intelligent charge and cyclical charge&discharge, which can achieve the purpose of activation by cyclical & deep operation to active the battery activated substance.

Specifications:

Voltage range	1.5～16V (2V/6V/12V)
Discharge range	1.7~～2.4V (2V)	5.4～7.2V (6V)	10.8～14.5V (12V)
Charge range	1.7～2.4V (2V)	5.4～7.2V (6V)	10.8～14.5V (12V)
Discharge current	0~100A	0~60A	0~30A
Charge current	1~100A	1~60A	1~30A
Display	7-inch LCD touch screen with 1024 x 800 resolution
Voltage test accuracy	±0.5%FS+0.1V
Current test accuracy	±1%FS+0.1A max. range 100A
Voltage accuracy	0.01V
Discharge current accuracy	0.01A
Data storage	Internal:16Gbit FLASH; External 16G storage
Data communication	RS485, USB
Working mode	Activation, constant-current, constant-voltage, float-charge
Host protection function	Over-temperature, over-current, current runaway trigger shutdown protection
Abnormal protection	Power line drop, mains cable drop
Over temperature protection	Built-in temperature sensing probe, temperature over 75°C, the device automatically stops discharging
Working environment
Cooling mode	Forced air cooling
Temperature	Operating temperature: -5～50℃, Storage temperature: -40～70℃.
Humidity	Relative humidity : 0～90%(40±2℃)
Altitude	Available below 4000m
Power supply	220VAC (-20% ~ +30%), 45 ~ 65Hz
Withstand voltage	Input-shell: 2200Vdc 1min / Input-output: 2200Vdc 1min / Output-shell: 700Vdc 1min
Safety	Satisfies EN 610950

Features:

● HD Display: 7-inch touch screen with resolution of 1024*800, the military-grade touch panel to reach strong anti-interference ability.

● Multi working modes: charge/discharge and cycle activation, cell accurate capacity measurement.

● Intelligent operation design: automatic recording and intelligent analysis of the entire test.

● Multi safety protection modes: over-current, short-circuit, high temperature, reverse polarity etc.

● High performance component: adopt polymer PTC to realize low power consumption and strong anti-surge ability.

● High-frequency wave width modulation (PWM) technology in charging: filtering, rectification, inverter, power efficiency conversion integration, built-in electromagnetic interference (EMI) surge protection circuit and microprocessor control technology.

● Charging&discharging parameters preset: multi templates parameter inside for different types of batteries, and automatically saved after power down and directly restart testing after power up.

● Equip with professional analysis software:simultaneously display data table as voltage, current curves, single cell histogram etc., and automatically generate report in EXCEL/WORD to print.

● Powerful storage space: with internal 16G for 1000 groups discharging data and external 16G USB data reader.

● Charging and discharging termination set via multi conditions: voltage at termination, discharging,current, capacity, discharge time.

● With activation and repair function:reduce the capacity decline and improve battery life.

● Self-calibration function for high measurement accuracy

● Curve Viewing Function: data files view in graphs and waveform format