UL2054 Battery Safety Testing Battery Flame Resistance Tester

The UL2054 Battery Safety Testing Battery Flame Resistance Tester is mainly used to test the flame resistance of the battery.

Description
Inquiry

UL2054 Battery Safety Testing Battery Flame Resistance Tester

Introduction:

The UL2054 Battery Safety Testing Battery Flame Resistance Tester is mainly used to test the flame resistance of the battery.

The principle is to place the battery on a flame resistant and high temperature resistant mesh screen (the mesh screen has 20 holes every 25.4mm, and the diameter of the steel wire is 0.43mm), and then light the burner below it (38.1mm above the top of the burner).
At the same time, observe the battery combustion until the battery explodes or burns down, and time the combustion process.

Product Parameters:

No.	Item Name	UL2054 Battery Safety Testing Battery Flame Resistance Tester
1	Burner	Inner diameter of pipe orifice is 0.375 inch (9.5 mm) and length is about 100 mm
2	Bunsen burner	can adjust the burning angle of 0-45-90 degrees and is equipped with corresponding angle indicator
3	Flame application time	0~99.9 seconds ± 0.1 seconds
4	Flame height	10~75 ± 2mm (adjustable)
5	Ignition device	Automatic ignition
6	Width of test cover	610mm X depth 355mm, octagonal (use double-layer mesh holder to realize rapid replacement of aluminum mesh
7	Height of test cover	305mm
8	Test aluminum mesh diameter	0.010 inch (0.25mm) 16 mesh × 16 mesh
9	Surface diameter of test round hole	102mm