CPT-III Touch Screen CT PT Analyzer, Automatic CT PT Analysis Instrument

It is used to measure all kinds of current transformer and voltage transformer. It can calculate the ratio errors and phase angle errors of current transformer and voltage transformer at rated burden and working burden in one test.

Description
Inquiry

CPT-III Touch Screen CT PT Analyzer, Automatic CT PT Analysis Instrument

Introduction:

CPT-III Automatic CT PT Analyzer is used to measure all kinds of current transformer and voltage transformer.

CPT-III Automatic CT PT Analyzer can calculate the ratio errors and phase angle errors of current transformer and voltage transformer at rated burden and working burden in one test.

CPT-III Automatic CT PT Analyzer can automatically evaluate the test results according to the selected standard to determine whether the transformer is qualified.

Application:

Tests for current transformer	Tests for voltage transformer	Applications for CTPT analyzer
Excitation curve and parameters test	Turns ratio test	CT nameplate check
Turns ratio test	Polarity test	CT parameters check in work burden
Ratio and phase error test	Secondary burden test	CT transient parameters analysis
Polarity mark check	Coil resistance test	CT ratio and phase error calibration
Coil resistance measurement	Ratio error, phase angle error test	PT routine test
Secondary loop burden measurement
Error line curve test for protection CT
Transient CT parameters test
CT nameplate guess
Saturation hysteresis loop curve measurement

Specifications:

Test standards: IEC60044-1, IEC60044-6, IEC60044-2, IEC60044-5, C57.13

Power supply: AC220V±10%, 50/60Hz±10%

Voltage output: 0.1~180V (AC)

Current output: 0.001~5A(RMS)

Power output: 500VA

Maximum knee voltage measurement: 45KV

PT ratio error measurement: typical error <0.05%, maximum error<0.1%

PT phase angle measurement: maximum error < 3min

Memory capacity: >1000 groups test results

Working condition: temperature: -10℃～50℃, humidty: ≤90%

Size: 485mm×356mm×183mm, weight: <15kg

Parameters	Range	Error	Resolution
Current	0~10A (automatically change range in 0.1/0.4/2/10A)	<±0.1%+0.01%FS	/
Voltage	0~200V (automatically change range in 1V/10V/70V/200V)	<±0.1%+0.01%FS	/
Turns Ratio	1~5000	<0.05%	/
Turns Ratio	5000~35000	<0.1%	/
Phase	/	±2min	0.01min
Winding Resistance	0~8kΩ (automatically change range in 2ohm/20ohm/80ohm/800ohm/8kohm)	<0.2%RDG+0.02%FS	0.1mΩ
Temperature	-50~100 Celsius degree	<3 Celsius degree	/
CT Secondary Burden	0～160ohm (automatically change range in 2ohm/20ohm/80ohm/160ohm)	<0.2%RDG+0.02%FS	0.001ohm
PT Secondary Burden	0～80kohm (automatically change range in 800ohm/8kohm/80kohm)	<0.2%RDG+0.02%FS	0.1ohm
PT Ratio	1~10000	<0.1%	/